Fanmisic HiFi long play phonograph &record player &MM moving magnet phono ,automatically arm

antique design play support USB transcription high quality and enjoy music

Original yellow wood color

 

Black walnut color

 

 

Fanmusic 2011 HiFi long play phonograph &record player &MM moving magnet phono ,automatically arm

 

Description

lp play

USB recording function ,you can connect computer

Dual-channel signal output! Along with a preamplifier but no amplify the signal output!

Directly connected to the audio amplifier

Post-professional grounding wire

Needle pressure adjustable available and piece  pressure adjustable available

Blu-ray speed monitoring: 33-1/3,45,78

Automatically back to the arm function

Professional tonearm

Iron triangle of MM moving magnet cartridge

About Phonograph behind the several functions :1: AUX, this logo for the dual Lotus signal output, the output level same as CD, DVD, can be directly connected to your amplifier or audio equipment, do not need an external phono, and  also can be understood as a "left and right channels Output (built-in phono)2: GND, this is identified as a ground wire, a small portion of the old players will be installed it in the wall when they decorat the house, good jukebox interface, but the majority of users's home is no such interface, if you do not have professional GND ground wire interface , you can use a wire received a jukebox rear GND interface, a receipt of the nail, iron nail will be to the floor or wall of your home ,after nailing in the nails sprinkle a little water.  (if  not a considerable fever players no need to access the grounding line because your hearing hard to identify the difference to the level)3: PHONO OUT, identified as a professional phono output interface, an external independent phono stage!4: USB, this logo is a USB recording line interface randomly comes with recording software and USB cable, you can link to the computer  and recording the authentic vinyl sound , and then send and to share with your relatives, friend .

Installation or replacement of the belt:

Step 1: turntables middle of a clamp (above the identity of B), this clamp with the word screwdriver down the middle Yinzhu into the hollow clamp at the outside a little harder, that is, clamp can be removed

 Step 2: The turntable lift, belt set on a turntable, and then to turntables at the intermediate silver pillars and put it back manually rotate the turntable allowed from the turntable hole to see on the map. A column at the belt, hand set of turntables on the belt to gently pull out the set in Figure A at the Belt column.

 Step 3:  removed the clamp before , at the middle silver pillar recess, with pliers and a clip to snap into.

Accessories for installation & adjustment and operation instructions:1, tonearm counterweight, the black part towards the inside,after  put on and turn down  ,anti-roll-out! New needle case generally so that the front-end needle pressure lightly, after some time, the needle can let the pressure of the front-end needle a little heavier!2, control the intensity of the left and right lateral movement in the tonearm, when received 0, play a more smooth, numerical transfer large horizontal intensity of larger3.Tonearm up and down the push rod, when  move the tonearm, push back from the tonearm to move to the record above the (or the tonearm stand),  push down the lever 4, the tonearm bracket5, tonearm

6, the cartridge (stylus)7, the speed regulator, there are three speed in the market :33 / one-third (also known as 33 rpm), 45 rpm, 78 rpm. We adjust here , pay special attention to: "+ -" speed fine-tuning function, generally push down to the middle position.

Fanmisic HiFi long play phonograph &record player &MM moving magnet phono ,automatically arm